Leading provider of Thermal Conductivity Testing and Thermal
Conductivity Instruments as well as Thermal Resistivity,
Specific Heat Capacity and Thermal Diffusivity.
Specific Heat Capacity Testing Services
TPS (ISO 22007-2:2008)
The Hot Disk Transient Plane Source constitutes an industry benchmark Thermal Property test system. The TPS Thermal Conductivity Instrument is designed for analyzing thermal transport properties of solids, liquids, paste, and powders, including various types of geometry and dimensions. The TPS 2500 S and TPS 1500 Thermal Conductivity Systems are the only Transient Plane Source (TPS) Method to meet a testing standard (ISO/DIS 22007-2.2).
TPS 2500 S THERMAL CONDUCTIVITY METER SPECIFICATIONS
| Materials | Solids, Liquids, Powders & Paste |
| Thermal Conductivity | 0.005 to 500 W/mK |
| Thermal Diffusivity | 0.1 to 100 mm2/s |
| Specific Heat Capacity | Up to 5 MJ/m3K |
| Measurement Time | 1 to 1280 seconds |
| Reproducibility | Typically better than 1% |
| Accuracy | Better than 5% |
| Temperature Range | Cryogenic to 750°C |
| Power Requirements | Adjusted to the line voltage in the country of use |
| Smallest Sample Dimensions | 0.01mm High, 2mm Diameter (Cylindrical sample) |
| Largest Sample Size | Unlimited |
| Sensor Types Available | Kapton insulated with or without cable (from cryogenic temperatures up to 180°C). |
| Mica insulated without cable (Room Temp. up to 750°C). | |
| Meets ISO Standard | ISO/DIS 22007-2.2 |
ASTM E1269
Differential scanning calorimetric measurements provide a rapid, simple method for determining specific heat capacities of materials.
Specific heat capacities are important for reactor and cooling system design purposes, quality control, and research and development.
| Materials | Solids, Liquids, Pastes & Powders |
| Heat Capacity Range | Material Defined kJ/kg°C |
| Temperature Range | -150 C to 700 C |
| Accuracy, Precision | 5%, 2% |
